Skip to main content

Trio Kenwood KD-1033 turntable main bearing service

  One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to  Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor,  mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The Pioneer main b
Post a Comment

Fixing a noisy motor in a NAD 5120 turntable

I was recently given a NAD 5120 by my good pal Stephen Ansell from HiFi Hangar. The Deck was in very good condition, but had a noisy motor I've stripped and serviced a few of these decks as described in my other NAD blog, b ut this time I decided to make a video of stripping the deck and giving the motor a quick service

 
Labels:

Comments

Unknown said…
Hi Jonathan, following up to our chat on youtube with ref the nad 5120 motor issue. Is it possible to maybe pm you to send the motor to you for assessment? Kind regards, Nick.
June 27, 2016 at 8:25 AM
Mr Ives said…
Sure Nicholas , you can find me on gmail and my name is Jonathan Ives
June 27, 2016 at 8:33 AM
Unknown said…
Hi Jonathan, thanks for your video on youtube reference the nad 5120 motor. Cleaning only hasnt fixed my motor noise, thinking about desoldering the motor and gettting you to assess it. I suspect the thrust bearing is missing, looks like previous owner mangled the casing etc. Can i pop in a ball bearing, i have a supply of rc car bearings of size 2mm approx? Thanks John, Nick.
June 27, 2016 at 11:26 AM
Mr Ives said…
Sure, I suspect the ball may be missing from the lower thrust bearing. When the motor is open have a look down black plastic fittin in the bottom of the motor. There should be a tiny bearing in there, might need a torch to see it, but its job is to keep the motor pushed up, happy to take a look if you want to remove it (you'll need to desolder and remember which wire went where) and send to me I'm jonathanivesATgmailDOTcom
June 27, 2016 at 1:28 PM
Joseph said…
Hi Jonathan

Thanks for the video.
I have a problem with my NAD 5120 turntable there is a little different than the one you solve in your video.

When I turn on my turntable it starts making a squeaking sound after it has been turned on for 30 seconds or so, the squeaking sound will continue until I turn the turntable off and the sound even becomes louder and louder.

The noise comes from the motor (it took all other elements of the turntable and it still made the sound), do you have any experience with how I could solve the problem and especially solving the problem without replacing the motor.

kind regards
Joseph
January 11, 2022 at 5:06 PM
Mr Ives said…
Hi Joseph, you are welcome.

I think if the noise comes from the motor, then the process I went through is really the only option. if the motor makes a noise, even if it starts after a while , perhaps heat related) all you can do is dismantle the motor, clean and lubricate.

Q: the aluminium pulley attached to the motor. is it securely fixed ? its not able to rotate on the spindle ? that might make a noise with the belt on
January 11, 2022 at 7:22 PM
Unknown said…
Hi.
Is the grub screw on the top of the pulley?
I've used a jewelers loop and there might be a tiny slotted screw but I'm not sure!
Thanks
February 28, 2022 at 11:33 PM
Mr Ives said…
Hi, yes - the slotted grub screw is at an angle and is accessible from the top. Sometimes there is enamel paint over it and you may have to pick it out with a pin first. Good luck
March 1, 2022 at 8:20 AM
Post a Comment

Popular posts from this blog

Restoring a Pioneer PL-12D Turntable

 I got back into vinyl records about 18 months ago, and have collected a few hundred albums, mostly second hand. I have a number of turntables (NAD 5120, Ariston QDeck, Pioneer PL12D ) which I got also second hand. I keep a few, some end up passed onto friends, some that are too far gone are kept for spares. In most cases they have required a little work to get them running again. Last week I was lucky enough to get a Pioneer PL-12D turntable from freecycle. The lady who offered it, said that she in turn had received it from freecycle , and had replaced the belt but couldn't get on with the springiness of it, and had got a modern USB turntable. I have previously worked on one of these decks, and know what she means about the suspension system used. While this blog is specifically about this particular model of deck, many of the concepts are similar to others from this vintage. Many Japanese belt drive decks throughout the  1970's shared very similar construction, so this ma
285 comments
Read more

Bracing IKEA EXPEDIT or KALLAX cabinets for greater rigidity when used with a turntable

The inevitable problem, too many records. Turntable and amplifier on top Like many record collectors around the world, I have a number of IKEA cube cabinets from both their EXPEDIT (older) and KALLAX (newer) ranges. These are easy to make, cheap to buy and perfect for record storage. The system comes flat packed and uses bolts and dowels to hold the system together. If you follow the instructions  the system is strong and should not collapse. You can augment the joints with PVA wood glue for extra strength. My turntable sits on top of an EXPEDIT 2x4 cabinet, laid along the long side, with some felt feet to support it from the floor, and you can use KALLAX in the same way. It's been great but has two problems I wanted to address : 1) Because the system has no back panel, the records  can be pushed too far back. 2) While the structure is strong and fairly rigid, there was some lateral movement. With heavy equipment on top, I found that if I nudged or knocked either top side, this all
3 comments
Read more

a vintage Sonab 85S / Yamaha CP-500 turntable

The Sonab 85S turntable You'll see from this blog that I'm interested in vintage audio equipment , especially turntables and speakers. I keep an eye on ebay for potential bargains, and saw this turntable listed quite close to me and for a very good price, £60 buy it now, including 45 adapter, dust bug, DIN adapter, record clamp and a very nice Shure M95 cartridge. Condition listed as very good and with the original sonab headshell. I've been interested in this deck for sometime, as to my eyes , it's a particularly nice design, with the very simple tonearm and deep chassis. I was aware that the model , from the late 70's was a cooperation between Swedish manufacturer Sonab and Yamaha. I don't know how much was contributed by which firm, but the same deck, or one very similar is also to be found as the Yamaha CP-500, though typically in teak rather than black. There were two Sonab models , the 75 and 85, the former being a manual  deck, the latter an automatic, an
14 comments
Read more