One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor, mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The Pioneer main b
I like to fix up old turntables, especially odd or unloved examples. I've posted blogs on other decks , and back in November I saw a Thorens TD280 on ebay at a very low cost, close to where I live. I prefer to collect, as decks need careful packing. In the end I bid and won the deck, a Thorens TD280 MK IV. I am very familiar with the Thorens brand, my father had a classic TD150 MkII followed by a TD 160 - both classics from the Golden era of the 70's. I read that the deck was a late model, and while not a classic Thorens, was widely liked by people who had owned one. the TD280 is from the mid 80's when CD had started to put a lot of turntable manufacturers out of business, and like the Ariston Q-deck, was a bit of a final gasp from a declining industry. I got the auction for £64 as the external power supply had been lost, but I was sure I could source a new one. A bit of research indicated the external power supply is 16v AC, and I happened to know this is the