One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor, mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The Pioneer main b
Normally my posts have been focused on the subject of repairing or recycling, hence the blog being called mending things. I decided to change a little and write a short blog post on my recent vacation to Morocco, and the city of Marrakesh . I guess mending my mind, it's good to have a break and explore somewhere new. Morocco is wonderful, friendly people, great food, and much to see. We had a great time exploring the city and the Atlas mountains and valleys. We stayed at the Riad Le Clos des Arts ( www.leclosdesarts.com) which is a sublime sanctuary in the busy Medina of Marrakesh - an oasis of peace and quiet. Thoroughly recommended , Massimo and Giorgina were wonderful hosts. Inside Riad Le Clos des Arts We had two 1 day excursions with , to the Atlas Mountains and Valleys, and to the Port Town of Essaouira. Both were with Idir Najimi from www.saharadesertkingdom.com . Idir is a superb driver & guide has a 4x4 car , and he takes advantage