One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor, mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The ...
Inspired by the success of my bridged energy monitor which enables me to publish to and access data from the web, I decided to also get an IAM. CurrentCost is a household energy monitor, which uses wireless technology to communicate with an inductive 'clamp' installed around the mains electricity cable in my meter box (see other currentCost post).
Recently the bridge enables the display to post data to the web. The IAM is a small unit resembling an electrical plug with a socket on the back. Basically you unplug a piece of equipment in your house, plug it into the IAM and plug the IAM into the wall socket. What it does is enable you to monitor individual appliances in your household using the CurrentCost display, in addition to the whole household. My Display supports up to 9 IAMs in addition to the primary function of displaying the total household consumption.
I've always been a bit mystified as to why my background usage never falls much below 300 watts. Even while...