One of my first posts in this blog was regarding the servicing of the Pioneer PL12D turntable, and that has proven to be the most popular by a significant margin. The Pioneer PL12D had its competitors, and probably the most popular alternative was the Trio Kenwood KD-1033 turntable. I use both names (Trio and Kenwood) as the company operated under different names in different markets. In the UK they were Trio, possibly because the brand Kenwood was most famous here for food blenders. 95% of a KD-1033 is similar to Pioneer PL12D, and servicing them is very much the same process. Both are belt drive , have an AC synchronous motor, mechanical speed change , a main bearing, sprung top deck and rubber motor mounts. the KD-1033 uses a different type of anti skate mechanism, employing a thread and weight. The plinth is shallower with an internal cross brace. One aspect that is different is the design of the main bearing, and servicing it is a little harder than a PL12D. The ...
I'd recently noticed that clothes were often still rather wet when I took them out of the machine. This started around November, but lately the fast spin cycle has been accompanied by a crackling noise from somewhere inside, like sparking or arcing. I had similar symptoms with an old Servis washing machine, and it meant that the brushes were worn down to the brass spring-cups. Finally last Monday the machine failed it's cycle displaying a C9 error code. I decided that it was worth replacing the brushes, and after a lot of searching (not all spares sites are easy to us) I got through to AEG/Electrolux spares department and ordered a new set (£16 per brush and you need 2 !). Today I'll fit them, using the approach taken in the companion blog on replacing bearings. Update All went well. I : 1) disconnected the washing machine from the electricity, water & waste 2) emptied any water from inside via the filter hatch (lower front left hand side) 3) Put some old towels on the...